Wind energy, new practice
Wind energy engineering, from resource data to grid-connection drawings. NEW
Layout, yield and grid-connection engineering for wind farms and wind-solar hybrid plants. Our newest practice runs on the same portal, the same multi-level QC and the same named engineer as our solar work.
Scope
What is included, and what it comes as.
Fixed deliverables, checked by a second engineer before they reach you. Formats: Layout drawings in PDF and DWG, yield report, SLD and protection drawings, BOQ, approval set.
Resource and layout
- Wind resource data review, met mast and LiDAR
- Micro-siting and turbine layout with wake losses
- Energy yield assessment, P50 and P90
- Hybridisation with solar PV and BESS on a shared evacuation
Civil, electrical and approvals
- Foundation and civil design review
- 33 kV collector system and pooling substation SLD
- Cable sizing, earthing and protection
- Grid connectivity and CEIG approval drawings
- BOQ for the balance of plant
Who this is for
Developers and EPCs planning wind or wind-solar hybrid plants in India who need an independent layout, a bankable yield number and a grid-connection set, without hiring a full wind team.
What it changes
Turbines sit where the wind is and the wake is not, the collector system is sized once, and the approval drawings come from the same model as the layout.
How it runs
6 steps from project creation to delivery.
Every project is created on the client portal, owned by a named engineer and checked by our AQC team before issue. You can see its status at any time.
Project created on the portal
Site boundary, resource data and turbine shortlist uploaded.
Resource review
Met mast or LiDAR data checked, long-term correlation reviewed.
Micro-siting and yield
Turbine layout with wake modelling, P50 and P90 yield.
Civil and electrical
Foundation review, collector system, pooling substation SLD, protection.
Approvals and BOQ
Grid connectivity and CEIG drawings, balance-of-plant BOQ.
QC and delivery
AQC review; drawings and reports on the portal.
The inputs that start the clock
Upload these with the project and the clock starts the moment it is created. Missing inputs are the most common reason a turnaround slips.
- Site boundary with coordinates and land ownership map
- Wind resource data: met mast or LiDAR, with duration
- Turbine models under consideration
- Grid connection point, voltage and distance
- Geotechnical data if available
- Any hybrid solar or storage block to integrate
Price depends on plant capacity, the quality of the resource data, and how much of the civil, electrical and approvals scope is included. Agreed upfront.
FAQ
Questions clients ask about this service.
If yours is not here, ask it on WhatsApp and you will have an answer the same day.
Is wind a new practice for Eden?
Yes. Wind and biogas are our two newest practices, staffed by the same engineering team and run through the same portal and QC as 20,000 solar designs.
Do you do wind-solar hybrid plants?
Yes. Hybrid layouts share the evacuation and pooling substation; the solar block is designed by our ground-mount team and integrated into one set.
Can you review a layout we already have?
Yes. Resource review, yield check and layout review are available as a standalone scope.
Which deliverables are bankable?
The yield assessment is produced with P50 and P90 figures and documented assumptions, in a format lenders are used to reviewing.
Get started
Send the project. Get scope, price and schedule within one business day.
Or register on the portal and create the project directly, or message us on WhatsApp with the same details.
Got it. Your project is in the queue.
We reply within one business day with scope, price and schedule. If it is urgent, send the same details on WhatsApp to +91 95107 18852 and we will start today.